Cooler Master Elite 130 Mini ITX Tower Case - schwarz • EUR 32,69 (2024)

FAQs

Is Cooler Master case good? ›

The Bottom Line. Cooler Master's MasterCase H100 is a compact, low-cost mini-ITX PC case with a giant glowing fan up front. Its support for full-ATX power supplies and decent-size video cards makes for a solid budget option for a small gaming system.

The compact structure can efficiently house CPU coolers up to 155mm in height and radiators up to 280mm in length, so even the hottest running hardware can't be held back.

Mini-ITX is a 170 mm × 170 mm (6.7 in × 6.7 in) motherboard form factor developed by VIA Technologies in 2001.

The Cooler Master HAF 700 EVO has "high air flow" in its name for a reason. This PC case is the go-to for air cooling of all kinds.

For this route, we recommend Cooler Master's MasterLiquid 360 Atmos or MasterLiquid 240 Atmos AIO coolers. With features such as an optimized dual chamber design and our most powerful Sickleflow Edge 120 fans, the Atmos is a premium AIO solution.

While Noctua's regular 120mm CPU coolers stand 158mm tall, the NH-D12L measures only 145mm.

FAN AND RADIATOR SUPPORT

The front supports up to two 140mm fans and up to a 240mm radiator. The rear supports a 120mm fan or radiator and the top two 120mm fans.

The MasterBox Q300L case supports CPU coolers up to a height of 159mm, graphics cards up to a length of 360mm, and power supplies up to a length of 160mm.

Mini-ITX PCs also provide energy efficiency and quiet operation, ideal for those seeking a green and silent computing environment. However, it's essential to consider the drawbacks of Mini-ITX PCs, such as limited expansion options, potential cooling challenges, and higher component costs.

Why is Mini-ITX more expensive? ›

Mini-ITX motherboards and cases often come at a premium due to their more compact design, while MicroATX components can be more budget-friendly.

What is information technology extended (ITX)? ITX refers to a form factor, which is a smaller version of the standard ATX motherboard used in computer systems. It is designed to fit into compact cases and is commonly used in small form factor (SFF) and mini-ITX systems.

The case supports standard length ATX PSU up to 180mm and graphics card length (VGA) up to 343mm.

Though you do not want to over tighten the mounting screws of the cooler as I have heard of people doing so and causing damage. General rule of thumb is to snug the mounting screws a quarter turn at a time, then go to the next one, and so on. Repeating this procedure until the screws are snug and tight.

Elite 110 is built with an intelligent use of internal space. It can support the latest Mini ITX motherboards and graphics cards (up to 8. 3" Long) while still supporting full sized power supplies up to 180mm long and three HDDs or four SSDs.

The attention to detail is apparent in its design, and the rated 160,000 hour-plus lifespans for the fans and 210,000 hours for the pump, combined with a 5-year warranty, show that Cooler Master truly backs the quality of its cooler.

The Cooler Master MM711 and the HK Gaming Mira-S are both excellent ultra-lightweight gaming mice with honeycomb shells. The Cooler Master is marginally lighter and feels sturdier. It also has a slightly more flexible cable, a much higher maximum CPI, a lower lift-off distance, and a marginally lower click latency.

Cooler Master is another bulk distributor of power supplies. That isn't necessarily a bad thing, but the company's PSUs are about as reliable as Thermaltake and Silverstone. That's mostly because Cooler Master uses the same manufacturers as its competitors to outsource its PSUs.

Cooler Master Technology Inc. is a computer hardware manufacturer based in Taipei,Taiwan. Founded in 1992, the company produces computer cases, power supplies, air and liquid CPU coolers, laptop cooling pads, and computer peripherals.